What Should Hospitals Know Before Repairing Ultrasound and X-Ray Equipment?

When medical equipment fails in a hospital, patients are at risk. A delay in diagnosis and treatment causes suffering while revenues are lost due to the inability to provide services. What should hospitals know before requesting service for their ultrasound and x-ray equipment?

Before attempting any repairs, the hospital administration should check whether the equipment is under warranty, whether there are certified parts available on the market, and whether the service provider is FDA- and Joint Commission-certified. The administration should also establish if the cause of the malfunction was hardware- or software-related or due to the operator’s error, which might indicate whether a minor adjustment or a major overhaul is necessary.

At Midwest Biomedical Technologies, we often advise clinical engineering teams on precisely these sorts of issues. Whether you run a major regional medical center in Chicago or a small outpatient surgery clinic, understanding the technical and regulatory implications of your diagnostic imaging equipment is vital.

Consider these factors before approving any service calls on your high-value diagnostic imaging equipment.

The Financial and Clinical Impact of Equipment Downtime

Medical imaging equipment is one of the most substantial capital expenditures for any medical facility. The downtime of a CT scanner, MRI machine, or digital radiography room has serious financial repercussions. Reduced patient capacity, delays in diagnostic procedures, and the diversion of ambulatory and emergency traffic to other facilities can cause significant disruption to hospital operations.

For routine diagnostics, long equipment downtime causes rescheduling that frustrates patients and harms a hospital’s reputation. In addition, an x-ray or ultrasound room that’s down for repairs is a huge expense, with thousands of dollars in lost revenue every day. This is why hospitals need proactive Healthcare Technology Management (HTM) and quick, reliable biomedical equipment repair.

Key Considerations Before Servicing Ultrasound Equipment

Ultrasound machines are exceptionally portable and delicate, which makes them subject to a unique set of potential damages. Before agreeing to pay for an ultrasound equipment repair, make sure you review the following list of common failure modes.

1. Transducer and Probe Integrity

The most common source of failure in an ultrasound machine is the transducer probe. They get dropped, run over, dropped again, and subjected to harsh chemical cleaners. First, try a different probe in the same port to rule out the probe itself. Then, test the suspected faulty probe in another machine if possible. Our techs often see hospitals throw away thousands of dollars in equipment because one specific crystal array or pin needed repair.

2. Software and PACS Integration

Sometimes, a machine can be working fine mechanically, but it may not be sending images to the PACS or RIS. Before calling in mechanical service, check the network connections and DICOM setups. Sometimes it may just be a simple software update or an IP conflict that is causing the error.

3. Power Supply and PCB Issues

Ultrasound units require a certain amount of electricity. Deviations from the standard can damage the printed circuit boards or the power supply. If your system is shutting down or freezing randomly, test the facility’s power supply and the unit’s power supply to rule out those problems before you suspect the hard drive or mother board.

What to Know Before Executing X-Ray Equipment Repair

X-ray equipment repair involves high voltages, large moving parts and many safety precautions to avoid radiation exposure. The challenge is greater in terms of regulatory requirements and patient safety.

1. X-Ray Tube Lifespan and Calibration

The x-ray tube is a consumable item. It loses its performance each second because it is used. If you have noticed poor-quality imaging or arcing, it is a sign that the tube is going bad. But before you replace the x-ray tube, which is very expensive, check if the generator and the high-voltage cables are operating properly. A defective cable can mimic the symptoms of a bad x-ray tube.

2. Collimator and Table Alignment

Mechanical breakdown of the bucky, table, or collimator can cause misalignment. When technologists have difficulty placing a patient or the radiation field does not match the light field, the machine requires mechanical calibration. Mechanical calibration should only be performed by qualified personnel to ensure that it meets FDA radiological health regulations.

3. Radiation Safety and Compliance

Any service performed on an x-ray tube, collimator or generator must be calibrated to verify that exposure levels are within the required limits. The Joint Commission then requires documentation of these repairs. Your imaging service provider should be able to provide service reports verifying that the equipment was tested and calibrated to original equipment manufacturer (OEM) specifications before being returned to service.

Repair vs. Replace: A Decision-Making Framework

One of the most challenging decisions that hospital administrators are confronted with is the decision to invest in new equipment. Our experts offer the following guidance on conducting the research for the procurement of a new radiology system.

Decision Factor Lean Toward Repair Lean Toward Replacement
Equipment Age Under 7 years old Over 7–10 years (End of Life)
Cost of Repair Less than 30-40% of replacement cost Greater than 50% of replacement cost
Parts Availability OEM or aftermarket parts readily available End of Support; parts are obsolete or hard to source
Clinical Utility Meets all current diagnostic standards Lacks modern integration (e.g., poor DICOM support, low resolution)
Failure Frequency Isolated, rare failure Chronic breakdowns causing frequent patient delays

If an old digital radiography system that requires a new digital detector panel and a new tube changes at the same time during the year, it is usually more cost-effective to purchase a new system. On the other hand, a five-year-old ultrasound with a broken monitor should virtually always be repaired.

Choosing the Right Service Provider

When a piece of equipment breaks down, companies typically have three options regarding repairs: the OEM (Original Equipment Manufacturer), internal resources such as clinical engineering, and independent service organizations (ISOs).

Although OEMs often have extensive knowledge about their equipment, their service contracts can be expensive, and they sometimes have long response times. Meanwhile, in-house service can provide a first line of defense but may lack the tools or specialized knowledge to perform advanced diagnostic tests or access particular calibration software.

Partnering with an experienced ISO is usually the best option in terms of fast response, broad multi vendor expertise and cost effectiveness. If you are looking for the right partner, make sure to check our guide on how to choose the right medical equipment repair service for your facility.

Common Mistakes Hospitals Make During Equipment Maintenance

Through our practice in servicing medical facilities, we have noted several recurring issues that lead to losses for a hospital.

  1. Ignoring Preventive Maintenance (PM): The biggest waste in terms of both time and money is treating equipment breakdowns as the primary issue. Only servicing machines once they break down leads to a much shorter lifespan for machinery and electronics.
  2. Poor Error Code Documentation: Whenever a machine goes faulty, it usually shows an error code on the screen. However, technicians quite often clean the system, restart, and move on without writing down what the code was. Always document the code to save hours of troubleshooting later.
  3. Using Improper Cleaning Agents: Some machines, such as ultrasound’s screen or transducer cable, require special treatment when cleaning. Using bleach wipes that are not designed for medical equipment will damage the plastics and rubbers, shortening the device’s lifespan.
  4. Neglecting to Backup Presets and Settings: Before allowing a service center to replace a major part like the motherboard, make sure you backup all your custom software settings, network configurations, and presets. Otherwise, your radiology department staff may have to spend hours, days, or even weeks re-establishing the devices’ settings.

Preventive Maintenance Checklist for Imaging Systems

To ensure the equipment’s greatest possible uptime, it is essential to design and stage a particular preventive maintenance workflow. Although the requirements may differ for different manufacturers, the following general instruction is based on the standard established by the Association for the Advancement of Medical Instrumentation (AAMI).

Daily Tasks (Completed by Technologists)

  • Inspect all relevant transducer cables, x-ray table tracks, and power cords for physical damage.
  • Make sure that the connections to PACS and RIS have been established.
  • Wipe all patient-contact surfaces with approved disinfectants.
  • Ensure all physical buttons and touchscreen areas are functioning properly.

Monthly Tasks (Completed by In-House Biomed or Technologists)

  • Inspect and clean the air filters of computer towers and other relevant machines to prevent overheating
  • Conduct phantom tests on ultrasounds and CT/x-ray machines to ensure there are no issues with images being produced
  • Test the monitor stands, brakes and wheel locks for mechanical integrity.

Annual/Semi-Annual Tasks (Completed by Certified Service Providers)

  • Perform a full electrical safety test.
  • Check radiation output and adjust the x-ray generator.
  • Perform an internal software diagnostic and clean hard drive cache.
  • Install any OEM software patches or updates.

To Conclude

The proactive approach to management of the medical imaging equipment is of paramount importance. This includes knowledge about the vulnerabilities of particular machines (such as ultrasound or x-ray equipment), adherence to relevant rules and regulations and taking into due consideration the timing of repairs or replacements of the devices.

Never wait until you’ve had a catastrophe. See that your preventive maintenance schedule is always adhered to and that you have a reputable service partner on call whenever a crisis erupts.

At Midwest Biomedical Technologies, our staff is here to keep your systems running. If you are having ongoing equipment issues or you need to develop a systematic maintenance program for your facility, please contact our team.

Frequently Asked Questions (FAQs)

How long does it typically take to repair an ultrasound machine?

Most ultrasound equipment repair can be done within 24-48 hours depending on the availability of a particular probe or circuit board. Software issues or calibration of the machine can be fixed within a few hours.

Are aftermarket parts safe for medical imaging equipment?

Yes, if they are certified and tested to be equal to or better than OEM standards. Reputable service providers will use high-quality aftermarket or refurbished parts to save you money while still meeting FDA and Joint Commission regulations.

What is the average lifespan of an x-ray tube?

An x-ray tube generally lasts from four to seven years depending on the number of patients and the types of tests. Warm-up practices and regular maintenance usually prolong tubes’ lives.

How often should medical imaging equipment undergo preventive maintenance?

Most manufacturers and even regulatory agencies such as the Joint Commission recommend comprehensive preventive maintenance at least once or twice a year. However, high-use facilities may need to perform them more frequently, such as quarterly, to ensure that equipment is available when needed.

Why is my ultrasound machine not connecting to PACS?

Network connection problems are commonly caused by IP address conflicts, firewall updates on the hospital’s main server, or a corrupted DICOM configuration on your machine. Therefore, check your cables and contact your IT department before calling for a hardware technician.

Can in-house biomedical teams repair digital radiography systems?

In-house personnel can perform minor diagnostic tests and repairs such as physical inspections and replacing parts. More involved procedures such as servicing high-voltage generators or performing radiation calibrations necessitate the use of specialized equipment and should be left to qualified imaging personnel.

How Often Should Medical Equipment Really Be Calibrated?

Walk into any healthcare facility and ask when they last serviced their medical devices; you are likely to hear the answer, “We do that every year.” In any healthcare facility, performing a service on equipment every twelve months is normal. As such, the idea of having an annual service schedule is so deeply rooted in the minds of facility managers that they believe it to be a legal requirement.

But is it?

The short answer is no. There is no one-size-fits-all medical device calibration schedule. An annual service may be a good default, but a rigid policy of servicing everything every year can lead to over-calibrating simpler, lower-risk devices while potentially overlooking more complex, higher-risk equipment.

At Midwest Biomedical Technologies, our experienced team has been assisting medical institutions with establishing compliant equipment management programs within the Midwest region since 2018. In this guide, we have discussed the factors that dictate medical equipment calibration frequency, established the criteria for assessing inventory, and outlined the relevant regulatory compliance standards.

How Often Should Medical Equipment Be Calibrated?

Medical equipment must be calibrated in accordance with the manufacturer’s recommendations and the clinical risk associated with the device. Even though most manufacturers suggest a yearly calibration, the calibration intervals should be determined based on the equipment’s usage and the environment in which it is kept.

Instead of relying on a generic timeline, healthcare facilities should determine their calibration interval by evaluating:

  • Original Equipment Manufacturer (OEM) recommendations
  • Applicable federal, state, and accreditation requirements
  • The device’s intended clinical use and patient risk
  • Measurement accuracy requirements and historical drift
  • Frequency of use and environmental wear

What Determines the Right Calibration Interval?

Establishing the calibration interval requires a risk-based approach. According to the National Institute of Standards and Technology (NIST), there is no standard calibration interval because numerous factors should be considered before establishing the calibration interval of an instrument.

Manufacturer Recommendations

The primary consideration for any service schedule can be found in the manufacturer’s service manual. For many categories of equipment, particularly imaging and radiologic devices, federal regulations and accreditation agencies require adherence to the OEM maintenance schedule.

Equipment Risk and Clinical Impact

A device that is used in a critically important procedure or one in which a dosage must be precise to exact measurements poses a greater risk if its reading is inaccurate. High-risk equipment needs to be calibrated more often or more strictly than lower-risk or general equipment.

Usage Frequency and Environment

A patient monitor that is located in a busy emergency room will see more wear and tear as well as use its sensors more frequently than the same device in a less active outpatient setting. The differences in physical, thermal, and mechanical forces can make a significant difference on the lifespan of a piece of equipment

Equipment Age and Historical Drift

As equipment ages, it tends to deviate from the precision of its original state at a quicker pace. By analyzing the equipment history and calibration records, you can determine if a particular piece of aging equipment requires a shortened maintenance schedule to stay within tolerance.

Regulatory and Accreditation Requirements

Joint Commission Organizations as well as CMS permit facilities to make alterations to the maintenance schedules of particular devices through the use of alternate equipment management or AEM. This applies to a variety of devices, but with specific exceptions and with specific requirements to understand what devices require the OEM timeline.

Should All Medical Equipment Be Calibrated on the Same Schedule?

No. Assigning the same service schedule to all of an organization’s devices is not a cost-effective or clinically responsible approach to equipment management. A proper inventory management program will classify devices according to their individual needs and assign service schedules accordingly.

Equipment Situation Factors Affecting Frequency What the Facility Should Consider
Frequently used equipment High physical wear, sensor degradation, rapid historical drift. Review performance history and usage rates. Consider shortening the interval if out-of-tolerance results occur frequently.
High-risk equipment Severe clinical consequences of inaccurate readings or failure. Strictly follow applicable requirements and manufacturer guidance. Do not extend intervals without robust, documented justification.
Imaging equipment Strict manufacturer specifications, radiation safety, complex internal components. Use documented service and verification procedures. CMS guidelines generally prohibit AEM programs for imaging equipment.
Newly acquired equipment Limited historical data regarding stability in your specific facility. Start strictly with manufacturer guidance. Build an equipment history before considering any schedule adjustments.
Equipment after repair Corrective work, replaced components, or physical trauma may affect measurement baseline. Perform appropriate post-repair testing and calibration verification before returning the unit to clinical use.
Equipment with repeated failures Evidence of mechanical instability or rapid electronic drift. Evaluate if the equipment has reached its end of life or if the calibration interval needs to be significantly shortened.

What Is the Difference Between Calibration, Preventive Maintenance, and Performance Verification?

These terms are often used interchangeably in the context of busy hospitals and clinics, but they have significantly different implications for the biomedical field. Being able to distinguish the two is essential to correctly servicing and recording service completion for compliance purposes.

  • Calibration: It can be described as the process of comparing a device’s measurement to a traceable reference standard (i.e., NIST-traceable standards) and adjusting the device so that its measurements are accurate in relation to the standard.
  • Performance Verification: It is the process of testing the equipment against set standards to confirm that it is performing within the set parameters without making adjustments to it.
  • Preventive Maintenance (PM): A scheduled inspection, cleaning, lubrication, or servicing of equipment or a replacement of batteries or parts in anticipation of future failure and to ensure continued reliability.
  • Repair: Actions taken to restore an item that is inoperative, malfunctioning, or nonconforming to technical specifications.

Typically, our biomedical calibration services comprise all three of these steps: we do preventive maintenance, check if everything is working fine, and then calibrate the sensors to guarantee total accuracy.

When Should Medical Equipment Be Checked Before Its Scheduled Calibration?

Even if your equipment has a 12-month service schedule, there are some events that require immediate intervention. Do not wait for the next preventive maintenance if the device went through:

  • Physical damage: The device was dropped, hit, or exposed to liquid spills.
  • Major repairs: Replacing any of the device’s major internal components (such as sensors, power supplies, or motherboards).
  • Unusual readings: Practitioners claim that the results are abnormal for the patient’s condition.
  • Relocation: Very sensitive equipment was transported to another facility or subjected to extreme temperatures during transit.
  • Repeated alarms: The machine tends to give technical errors or warnings.

How Often Should Imaging Equipment Be Calibrated?

Imaging equipment is one of the most hazardous and highly regulated forms of medical devices. Diagnostic X-ray, computed tomography, fluoroscopy, and ultrasound procedures require proper installation and commissioning to achieve dose accuracy and image quality.

Unlike some general biomedical devices, the maintenance schedule for most imaging equipment cannot be determined by a facility’s preferences. Facilities usually follow the recommendations of the original equipment manufacturer (OEM), state regulations regarding radiation safety, and federal regulations.

At Midwest Biomedical Technologies, imaging is our specialty. Our staff engineer has more than 30 years of experience in radiology and diagnostic imaging. From our office in Oak Brook, Illinois, we provide service imaging equipment support in the region, making sure that your equipment receives the service and testing needed to meet manufacturer guidelines.

What About C-Arm Equipment?

Mobile c-arms are used extensively in the operating room, outpatient surgical centers, and the pain management environment. They undergo frequent movement, being wheeled through doorways and exposed to temperature variations in the OR environment. All this requires careful oversight.

C-arm maintenance comprises more than simply a basic electrical safety inspection. It usually includes a performance evaluation of the image intensifier or flat panel detector, dose checks, mechanical examination, and comprehensive preventive maintenance of the device’s cooling and power supply.

If a system sustains damage, it may require professional C-arm repair. However, testing after repair is a critical step because even a minor maintenance activity can compromise the system’s geometry or output. Thus, facilities should always make sure that systems undergo a comprehensive performance evaluation before being returned to the operating room.

How Should Healthcare Facilities Track Calibration?

If it’s not documented, it didn’t happen. Documentation allows the facility to stay on top of what is going on with their equipment and get ready for state surveys, joint commissions, and internal audits.

A compliant calibration record should capture:

  • Equipment identification (Name, OEM, Model, exact Serial Number)
  • The particular workshop or department where it was serviced
  • The date when it was serviced
  • The one who performed the service (name and signature of technician/service provider)
  • The test equipment used (including its calibration traceability)
  • Particular test results (“as found” and “as left”), pass/fail
  • Out-of-tolerance findings with corrective action taken
  • The next due date for servicing.

Keeping up with this documentation is a huge task for a busy medical office or rehabilitation facility. That is why many Midwest facilities turn to us for documentation and compliance support to help maintain their equipment histories in an organized and auditable manner.

What Happens If Equipment Fails Calibration?

When a medical device is calibrated or tested and found to be outside of acceptable tolerances, the facility needs to respond accordingly. The general process would be as follows:

  1. Remove from service: Take the equipment off the clinical floor and put it out of service tag to ensure that it is not used until repairs have been made.
  2. Documenting the failure: It is important to document the “as found” readings that will give you information on what caused the incident.
  3. Assessment of impact on patient care: If the device was out of calibration, clinical leadership might have to take actions to determine if patient care had been compromised.
  4. Perform corrective action: The biomedical technician attempts to adjust the device back into specification. If the first action proves ineffective, medical equipment repair and/or replacement of components are required.
  5. Verify performance: The repaired unit must be calibrated to verify that it is working correctly.
  6. Document the return: The final “as left” status is recorded, and the equipment is returned to service.

How Can a Facility Build a Practical Calibration Program?

Building an effective equipment management program means changing the paradigm from a reactive paradigm to a proactive paradigm. 

Therefore, the first step is to create a complete digital inventory of the existing equipment: The proverbial knowing what you own. Then, a schedule should be created for every piece of equipment according to the manufacturer’s recommendations or legal requirements.

For many medical offices, skilled nursing facilities, and outpatient clinics, managing this kind of schedule internally can be overwhelming; but partnering with an independent service organization to administer a comprehensive preventative maintenance program is simple!

If you are now considering who to turn to for medical equipment repair, do not forget to read our guide on selecting the best option for your business. This way, you will be able to entrust your diagnostic tools to professionals who will correctly track and treat them, returning them to your staff in good working condition.

Need to Schedule Your Next Service?

Do not worry about keeping up with equipment maintenance requirements for your staff. Regardless of a full facility survey, specific imaging equipment service and repair, or even a regular maintenance program, we are here to help you. Reach out to set up an appointment time to review your inventory and make sure you are always survey-ready.

Frequently Asked Questions

How often should medical equipment be calibrated?

Medical equipment should be calibrated according to the manufacturer’s recommendations, amount of use, and the clinical risk it presents. Typically, equipment is calibrated once a year, but some equipment carries a higher or lower risk or is used more or less frequently, and so is calibrated more often or less often accordingly.

Is annual calibration required for all medical equipment?

No, not all equipment is calibrated annually. That’s a federal standard baseline, but every piece of equipment has a calibration schedule defined by the OEM (Original Equipment Manufacturer), federal regulations, or equipment history. Some are done semi-annually, while others are less frequent.

What determines a medical equipment calibration interval?

The calibration schedule is based on the information retrieved from the manufacturer’s service manual, clinical risk, frequency of use, potential hazards, the instrument’s maintenance history, and relevant regulatory or accreditation requirements (CMS/JCAHO).

Does medical equipment need calibration after repair?

Yes, any device that has been repaired by major corrective maintenance or has undergone component replacement or has suffered trauma shall be verified for performance and accuracy through testing and calibration. This is to ensure that repair did not affect the measurement baseline of the device before returning it to service.

Does Midwest Biomedical Technologies provide calibration services in Illinois and other Midwest states?

Yes. Based in Oak Brook, Illinois, Midwest Biomedical Technologies offers biomedical calibration, preventive maintenance, and repair services to medical institutions in the Midwest of the U.S., including Illinois, Indiana, Wisconsin, Michigan, Iowa, and the surrounding states.

What Does It Take to Become a Certified Biomedical Equipment Technician?

 

Medical equipment is the cornerstone of the modern healthcare system. However, medical devices and instruments do not maintain life on their own. They require meticulous day-to-day operation, calibration, and periodic major servicing to ensure reliable performance. This is where Biomedical Equipment Technicians come in with highly specialized professionals who perform a wide range of services related to the maintenance and repair of medical equipment.

At Midwest Biomedical Technologies, for years we have been servicing, maintaining, and upgrading imaging and biomedical equipment for medical facilities in the Midwest. When hospital administrators or our aspiring colleagues ask us what it takes to succeed at this type of work, we always give the same answer. To have a successful biomedical engineering career, one needs to have a certain understanding of mechanics, IT-networking technologies, and patient safety regulations.

If you are thinking of making a career out of healthcare technology management (HTM), below are the areas that you need to gain knowledge about to become a certified BMET.

How do you become a certified BMET?

To become a certified Biomedical Equipment Technician (BMET) you need to get a full-time BMET job doing repairs and pass the CBET exam offered by the Association for the Advancement of Medical Instrumentation (AAMI). People usually become BMETs by studying associate’s degrees in biomedical technology or electronics, undertaking military BMET training, or completing entry-level apprenticeships. You then have to work for two to four years before you can take up the exam.

What is a Biomedical Equipment Technician?

A Biomedical Equipment Technician (BMET) works with medical devices. They install, maintain, and repair them in order to make sure they are working properly.

BMETs (also called medical equipment repairers or clinical engineers) work at the intersection of technology and patient care. When a defibrillator needs to be tested, a C-arm needs to be calibrated, or a network connected patient monitor is disconnected from the EMR, a BMET is called upon.

The day-to-day responsibilities usually include:

  • Performing the scheduled preventive maintenance (PM) in accordance with the regulations of the Joint Commission and CMS.
  • Troubleshooting electrical, mechanical, and software malfunctions of clinical equipment.
  • Recording all service and equipment history in a computerized maintenance management system (CMMS).
  • Educating clinical staff, including nurses, physicians, and technicians, on the proper use of medical technology.

What Are the Education Requirements?

While there is no exact educational path one must take before applying to a job as a biomedical equipment technician, there are certain qualifications that employers are inclined towards. There are three general educational routes to consider:

1. Associate Degree Programs

The most common educational requirement is a two-year associate degree. Many community college or technical school programs offer an Associate of Applied Science degree in Biomedical Equipment Technology. This type of program includes heavy coursework in anatomical sciences and AC/DC electronics plus fluid mechanics and medical language.

2. Military Training

The United States Armed Forces offer some of the most elite biomedical equipment training programs in the country. Having served in the military and received training in the maintenance and repair of biomedical equipment, such experience is directly applicable to the civilian workforce. Hospitals and Independent Service Organizations, such as our company, are always in need of qualified personnel with military training.

3. Electronics or Engineering Degrees

Many technicians come to a specialty with an Associate or Baccalaureate degree in general electronics or mechanical engineering. This is because they do not have the required education in medical fields so they must receive additional training concerning anatomy, infection control, and FDA regulations, but these technicians still have the necessary trouble-shooting skills.

How to Get Certified: The AAMI CBET Process

The most popular certification for a biomedical equipment technician is the one provided by the AAMI Credentials Institute (ACI), known as the Certified Biomedical Equipment Technician. To take the certification exam, one has to satisfy certain educational and professional requirements and pass the test, which consists of 165 multiple-choice questions.

Even though the majority of states do not require a biomedical equipment technician to be certified, the credential demonstrates one’s competencies and devotion to the profession.

Eligibility Pathways

Before you can take the CBET exam, you must meet one of the following criteria:

  1. An associate degree in biomedical equipment technology plus 2 years of full-time BMET employment.
  2. Graduation from a US military biomedical equipment technology program plus 2 years of full-time BMET work.
  3. An associate degree in electronics technology plus 3 years of full-time BMET employment.
  4. Plus 4 years of full-time BMET experience for those without any of the above.

What is on the CBET Exam?

The exam spans three hours and covers six primary domains of knowledge:

  • Healthcare Technology Problem-Solving (30%): Resolving device faults, identifying problems related to software or hardware, and prioritizing repairs.
  • Healthcare Technology and Function (30%): Function of diagnostic, therapeutic, and monitoring systems.
  • Healthcare Information Technology (17%): The problem-solving approach for wired and wireless networks, EMR, and security.
  • Public Safety in the Healthcare Facility (10%): Electrical safety, infection control, CMS and AAMI regulations.
  • Anatomy and Physiology (7%): Medical terminology and physiological systems function.
  • Fundamentals of Electricity and Electronics (6%): Electronic principles such as current, resistance, and power.

Other Specialized Certifications

As technicians progress, they often specialize. AAMI offers additional credentials for niche expertise:

Essential Skills Every Successful BMET Needs

If you just have technical expertise, it will not make you an elite technician. When we hire engineers at Midwest Biomedical Technologies, we look for a specific skill set that combines technical skills with some soft competencies.

1. Advanced IT and Networking Competency

Medical equipment is no longer purely mechanical. Infusion pumps are upgraded over Wi-Fi. Patient monitors send vital signs directly into the hospital’s network. A BMET today needs to understand IP addressing, network security, and software patch management.

2. Regulatory Compliance Knowledge

You have to know how to properly document services for audits. You should be familiar with the intricacies of the NFPA 99 (Health Care Facilities Code), FDA medical device reporting (MDR), and HIPAA.

3. High-Pressure Problem Solving

When a surgical table fails during a procedure or an imaging system fails in the ER, technicians need to remain calm under pressure, communicate effectively with stressed-out clinicians, and be able to swiftly troubleshoot the issue.

Salary Expectations & Career Outlook (2024–2034)

The demand for biomedical technicians is on a steady rise. According to the Bureau of Labor Statistics (BLS) employment report for 2024-2034, the demand for medical equipment repairers is projected to grow by 13 percent, significantly above the average for all occupations.

  • Median Annual Wage (2024): $62,630
  • Top 10% Earners: Over $99,290 annually
  • Highest Paying Sectors: Hospitals (state, local, and private) lead the way with a median wage of $74,560.

The increased number of aging baby boomers will require an escalation in medical treatments, resulting in the need for more diagnostic and therapeutic equipment that requires maintenance. Therefore, for someone who is interested in job security, HTM is one of the most stable areas of technical expertise to pursue.

At a Glance: Degree vs. Certification vs. On-the-Job Training

Many candidates, however, confuse the different levels and experience. Below you can see the list, which demonstrates how they relate to each other.

Pathway What It Is Time Required Best For
AAS Degree in Biomedical Tech Formal academic training covering anatomy, electronics, and device function. 2 Years Entry-level students want a comprehensive foundation.
AAMI CBET Certification Professional credential validating your expertise and safety knowledge. 2–4 years of work experience + Exam Active technicians looking to advance their careers and salary.
Original Equipment Manufacturer (OEM) Training Specific, proprietary training on a single make and model of a device. 1–3 Weeks per course Technicians specializing in complex modalities like MRI or CT.

Career Options: Hospital In-House vs. Independent Service Organizations (ISOs)

As a rule, after being trained, a BMET can work either for a hospital (in-house) or for an Independent Service Organization (ISO).

Working In-House:

You report to the same facility every day. You have become close with the nursing staff. You work with an extensive variety of basic equipment such as beds, wheelchairs, and monitors to name a few. However, budgets can often prevent you from being properly trained on more sophisticated pieces of equipment.

Working for an ISO:

At Midwest Biomedical Technologies our technicians are an independent support staff for facilities throughout the Midwest. Our staff members are referred to as ISO technicians. They provide service at various different medical facilities including clinics, ambulatory surgery centers, imaging centers and nursing homes. The job has a lot of variety. One day you may be doing an electrical safety test at a dialysis facility and the next be repairing a portable X-ray machine.

If your facility is in the process of selecting providers, the insights shared in our blog, How do you choose the right medical equipment repair service for your facility, are a great place to start to understand the benefits of an independent organization.

Common Mistakes Aspiring Technicians Make

  1. Ignoring the IT Component: Many people enter the technical field to fix cars and to repair electronics. Now the technician is just as likely to be configuring an IP address than he is fixing a car. Do not forget your IT education!
  2. Rushing the Certification: You cannot take the CBET exam right after school, without the experience. Learn how to do the day to day preventative maintenance and documentation first, because the test isn’t that hard when you have the experience.
  3. Poor Documentation Habits: A repair is not complete until the paperwork is done. CMS and Joint Commission inspectors care deeply about service logs. If it isn’t documented in the CMMS, then, in the eyes of an auditor, it simply did not happen.

Conclusion & Next Steps

Becoming a certified biomedical equipment technician can take hard work, dedication, and a commitment to learning. Completing the associate degree program or military education, or working towards an apprenticeship will ultimately lead to a career of keeping patients safe.

Earning your CBET is a proud moment in life, a sign that you’ve become one more step closer to being a competent and qualified specialist. With the growing need for networked and highly integrated equipment, the demand for trained and certified professionals will only increase.

Are you a facility manager looking for qualified, specialized biomedical engineers to assist your clinical staff? Don’t leave your patient safety and compliance documentation to chance.

Visit our resources page for more information on healthcare compliance, or contact Midwest Biomedical Technologies to discuss how our direct-to-engineer service programs can help meet your specific equipment needs.

Request Repair | Call Us Directly: (708) 406-9887

Frequently Asked Questions (FAQ)

What is the difference between a biomedical technician and a biomedical engineer?

A biomedical technician is concerned with the maintenance, repair, and calibration of existing medical equipment in a clinical setting. A biomedical engineer works in a research setting to develop new medical devices and technologies.

How hard is the CBET exam?

The CBET exam is extremely challenging, as it covers a large amount of information in various fields, including electronics, anatomy, safety regulations, and IT networking fundamentals. To pass the test, you need to answer at least 116 questions correctly out of 165. You can achieve that by thoroughly preparing using the provided resources, including practice tests, and paying special attention to the AAMI materials.

Do you have to be certified to repair medical equipment?

In this situation, getting certified is not legally required to become a medical equipment repairer. However, employers of major healthcare facilities usually consider this as a significant advantage. In addition, many service providers highly recommend or require this particular credential.

Is biomedical equipment repair a good career?

Yes. It has good job security, the wage is a median of 62630$, and there is a projected job growth of 13% through 2034. It is a career that would be appropriate for people that want to work in the medical field but don’t want to provide day to day bedside care.

What is the highest-paying biomedical technician job?

The highest-paying jobs are usually associated with the position of a specialized imaging service engineer (MRI, CT, and cath lab) or a top-level managerial or administrative clinical engineer. The best paying jobs are often available in large medical equipment wholesale companies and specific hospital chains.

How Do You Choose the Right Medical Equipment Repair Service for Your Facility?

A malfunction in vital medical equipment will ripple through the whole organization and bring negative impacts in all areas: patient treatment is delayed, employees get upset, and money disappears. In situations like this, picking the right medical equipment repair company is very important.

At Midwest Biomedical Technologies, we have spent years working together with hospital administrators, surgery centers, and imaging centers in the Midwest region. We know that the selection of a biomedical company is not just a supplier issue, but a critical business decision.

This guide will assist you in finding a proper partner for medical equipment repairs for your health care institution.

What Does a Medical Equipment Repair Company Do?

A medical equipment repair company provides diagnostics, parts replacement, electrical safety tests, and preventative maintenance of your clinical equipment. Our services keep your medical equipment safe and precise. They also ensure it meets all FDA, CMS, and Joint Commission standards.

A clinical engineering ally does more than tighten nuts and bolts or change circuit cards. They also serve as your compliance manager for physical assets. 

It does not matter whether you are a hospital chain or a dialysis center; your biomed company should manage the entire life cycle of your devices. The responsibilities include:

  • Incoming inspection: We inspect the equipment even before it is brought into the hospital.
  • Reactive repair: We repair broken equipment immediately to reduce downtime.
  • Equipment calibration: We calibrate the diagnostic equipment properly to ensure compliance with NIST standards.
  • Documentation: We provide the exact documentation needed during a survey.
  • Decommissioning: We decommission old equipment.

OEM vs. Independent Biomedical Service Provider

Do you go for the OEM or the independent biomedical service company? The OEMs have specialized knowledge of the products they deal in, but their services are relatively expensive. Independent service companies provide fast service, save money, and can handle multiple brands from the same company.

The vast majority of healthcare operations managers will face this dilemma. In a complex organization such as yours, chances are that you have a variety of machinery manufactured by a range of vendors. This results in having numerous service agreements, dispatch centers, and bills.

This is the pros and cons list:

Comparison: OEM vs. Independent Service Providers

Feature OEM (Original Equipment Manufacturer) Independent Service Provider (ISO)
Brand Focus Single brand only Multi-vendor fleet management
Response Time Often 3–5 days; dispatched nationally Often 24–48 hours; dispatched locally
Cost Premium pricing Highly competitive; 15-30% average savings
Equipment Age End-of-life (EOL) support drops quickly Supports legacy and EOL equipment
Contract Flexibility Rigid, standardized tiers Highly customizable to facility needs

A number of clinics, skilled nursing homes, and surgical centers benefit immensely from working with independent biomedical service companies. At Midwest Biomedical Technologies, we serve multi-vendor fleets. So, we can calibrate defibrillators, repair infusion pumps, and inspect patient monitors all in one trip.

Core Criteria for Evaluating a Repair Partner

Every service provider is not equal. When looking for a partner to repair healthcare equipment, don’t just rely on their marketing materials. Ask detailed questions about their process.

1. Guaranteed Response Times

In healthcare, downtime hurts patients. If your EKG machine fails, waiting a week for repairs is not acceptable in a busy practice.

  • Question to ask: Are there any SLAs that ensure response times?
  • The benchmark: A dependable local provider will offer you 24-to-48-hour response times, and emergency dispatches for critical equipment.

2. Comprehensive Compliance Documentation

It is not enough to fix things up physically; you also need to show proof that you have done so. This is because the state surveyors or Joint Commission will ask for your maintenance records during their visit.

  • Question to Ask: How is maintenance information stored and delivered to customers?
  • The benchmark: The company must have a computerized maintenance management system. It should give you quick access to your service history, calibration certifications, and electrical safety test results.

3. Technician Training and Certification

Medical devices are complex machines, and you need to feel confident knowing the technician servicing your diagnostic imaging devices knows his stuff.

  • Question to ask: Do you have factory-trained or industry-certified technicians working on your devices?
  • The benchmark: Look for medical device technicians that meet AAMI standards and have degrees in biomedical engineering technology.

4. Access to Parts

There could be a technician at your location within two hours; however, without the replacement part, your system will be shut down.

  • Question to ask: Where do you get replacement parts from, and do you carry high-mortality parts locally?
  • The benchmark: Experienced companies have well-built supply chains, combining OEM parts and reliable aftermarket parts to ensure that repairs are fast and inexpensive.

The Role of Preventive Maintenance

How frequently should medical devices be serviced? Medical devices usually need annual preventive maintenance. However, higher-risk devices, like defibrillators and anesthesia machines, require testing every six months. Always consult the instructions set forth by the manufacturer and by the maintenance policy for your facility.

Maintenance of equipment in most medical practice owners’ minds is viewed as an expense to cover. Actually, maintenance acts as a risk management approach.

It is not only a matter of visually inspecting the machine. During preventive maintenance visits, a biomedical engineer performs the following:

  • Functional test verifies whether the device can execute its intended function within the clinical setting.
  • The output test verifies that the energy values are in agreement with the dial settings.
  • The electrical safety test verifies that chassis leakage current and ground wire resistance are in compliance with NFPA 99.

Relying only on repair will definitely result in machine failure when it counts. A good preventive maintenance program helps machines last longer. It also keeps patients safe and helps your annual budget stay steady.

Choosing the Right Service Contract

Signing up for a medical equipment servicing contract makes things more organized for you; however, it is important to choose an arrangement that suits your budget. A trusted independent company will have several options, not just one type of contract.

Decision Matrix: Service Agreements

Contract Type Best For What It Covers
Full Service Agreement Facilities seeking budget predictability and zero surprise costs. Preventive maintenance, all labor for repairs, and all replacement parts.
PM Only Contract Clinics managing tight budgets that want compliance guaranteed. Scheduled preventive maintenance and calibration only. Repairs billed separately.
Time & Materials (T&M) Very small practices or facilities with brand-new, under-warranty fleets. No contract. You pay standard hourly rates and parts costs only when you call.

A pure PM agreement with low hourly labor rates for reactive repairs offers the best cost-saving benefits for most nursing homes and ambulatory surgery centers.

Red Flags to Watch Out For

When looking at different service providers, watch for red flags with biomedical firms.

  1. Paper documentation: Avoid companies that provide carbon-copy paper receipts for equipment calibration. There has to be a digital, searchable, and audit-ready system of documentation.
  2. Bait-and-switch technicians: The company sends you highly qualified engineers during sales pitches for the contract, but inexperienced trainees are assigned to the task of maintaining the biomedical equipment.
  3. Unspecified pricing structure: There must be no surprise invoices. Travel charges and any minimum charges per hour or emergency charges have to be clearly specified.
  4. No local footprint: When a company says it services the Midwest region but does not have its technicians based near Chicago, their response is going to be poor.

The Advantage of a Local Midwest Partner

Health care is local. So should be your biomedical service.

While national repair centers are useful, you can’t send a broken sterilizer from a surgery center in Oak Brook to one in California. You will need an on-site technician.

The strength of Midwest Biomedical Technologies is our geographical reach. We have a presence in the Chicagoland region and offer prompt service within the I-88 region, throughout DuPage County, and in the states of Illinois, Indiana, and Wisconsin.

Through working with a locally based independent biomedical service provider, you get:

  • Faster routing: The technicians are based in your area, thus reducing the distance and cost involved.
  • Understanding of regional requirements: We know the requirements of the Illinois Department of Public Health (IDPH) and surveyors in your region.
  • Building relationships: The technicians will keep meeting you at your institution repeatedly; they will get to know your institution inside out.

Key Takeaway

Choose a biomedical equipment repair service that is committed to keeping you operational. The best biomedical repair companies ensure that you get good communication, well-trained technicians, documentation that is audit-ready, and budget flexibility.

No matter if you run one medical facility or several skilled nursing ones, you need a trustworthy biomedical repair team.

Here at Midwest Biomedical Technologies, our mission is to assist the Chicago healthcare community and beyond in the Midwest region. We have the expertise of a trusted OEM. Plus, we offer quick service and cost-effective options like a local partner.

Make sure that you do not wait until it is too late to ensure that your repair partner is set. Contact us today and request service.

Frequently Asked Questions (FAQs)

What does a medical equipment repair company do?

Medical equipment repair services test, calibrate, and fix clinical equipment to make sure that it functions properly and safely. They handle urgent repair requests and do scheduled preventive maintenance. They also conduct electrical safety tests and provide audit documentation for healthcare facilities.

How often should medical equipment be serviced?

Generally, most of the clinical machines are scheduled for servicing annually, whereas high-risk machines such as defibrillators, electrosurgical units, and diagnostic imaging equipment should be serviced semiannually. Service schedules must conform to OEM guidelines and AAMI standards.

Should you choose an OEM or an independent biomedical service provider?

If the equipment in your facilities is supplied by a range of manufacturers, it would be wise for you to consider an independent contractor. An independent supplier will ensure that you have one-stop service, fast dispatch, and considerable savings on costs.

What certifications should a repair company have?

Look for companies that hire biomedical equipment technicians. These techs should have studied biomedical equipment technology or hold a CBET (Certified Biomedical Equipment Technician) certification. They must adhere to FDA, NFPA 99, and the Joint Commission guidelines.

How does preventive maintenance reduce facility downtime?

Preventive maintenance means spotting wear and tear issues before they cause a full breakdown. This includes problems like a failing battery, damaged wires, or calibration drift. We fix a problem during a scheduled visit and avoid unexpected failures.

Can an independent service company provide compliance documentation?

Yes. A respected independent biomedical equipment company will use a computer management system. This system provides detailed logs for all repairs, calibrations, and safety tests. This is exactly what state surveyors and CMS inspectors want to see.

Posted in Uncategorized